When it comes to installing Straub pipe repair clamps, we are often at a loss as to where to start. Today, our editor from Nainuo will explain some tips for installing Straub pipe repair clamps, hoping to help you.

1. Select a more suitable caliber.
Determine the diameter of the pipeline that needs to be repaired, select the corresponding diameter when installing the patcher and connector, and then install it.
2. Keep it clean
When installing Straub pipe repair clamps and pipe repairers, it is necessary to ensure that the nozzle and the pipe wall around the pipe are clean and tidy.
3. Keep lubricating
When installing Straub pipe repair clamps and pipe repairers, our work will be difficult due to friction, so in special cases, soapy water or lubricant can be used to smear the position of the pipe opening, which can make the sealing ring The friction is reduced, and in an emergency, water can be used directly instead of soapy water and lubricant.
4. Point-to-point position
We need to place the stainless steel pipe repairer on the leaking position. The middle of the rubber ring should be aligned with the leaking point, and then tighten it with screws, which can reduce the leakage of water.
5. Appropriately increase screws
If there are two or more bolts on the Straub pipe repair clamps and connector, tighten them all when trimming the screws and nuts.
The above is the information we have prepared for you, I hope it can help you. In the future, when you install Straub pipe repair clamps and repairers, if you need it, you can contact us, and we will provide more professional services.