Stainless steel 304 clamps is a connecting device for connecting grooved pipe fittings, valves and pipe fittings. It is used to tighten the connection between quick joints. Generally, the joints are equipped with gaskets, rubber, silicone and tetrafluoroethylene. It has good performance, high sealing and easy installation.

As a tool for repairing pipes, stainless steel 304 clamps have installation methods and steps, but in many cases, in order to repair faster, it is easy to omit some steps, resulting in bad conditions. What should I do when bad conditions occur? What to do? Let's find out together!
1. Identify the outer diameter of the pipe and select the appropriate type of fitting. Don't choose the wrong one.
2. Eliminate burrs, sharp corners and debris from the end of the pipe, the purpose is to see that there is no foreign matter under the sealing rubber ring and on the steel pipe.
3. Mark the ends of both tubes so that the stainless steel 304 clamps are in the center. After piercing the product into one end of the pipe, align the ends of the two pipes and move the connector to the center of the two pipes.
4. Adjust the stainless steel 304 clamps, then use a hex wrench to tighten the bolts evenly. After tightening the bolts, tap the inside of both sides of the stainless steel 304 clamps with a mallet to get an even gap with the pipe, then tighten the bolts for a seal.
The above is the treatment method of the pipeline repairer in the bad state. When the bad situation occurs, the pipeline and the pipeline repairer should be checked, and then repaired and maintained according to the steps. Welcome to inquire if you need a pipeline repairer!