Pipe repair coupling, as a tool for repairing pipelines, has installation methods and steps, but in many cases, in order to repair faster, it is easy to omit some steps, resulting in bad conditions. What should I do when bad conditions occur? Woolen cloth? Let's find out together!

1. Identify the outer diameter of the pipe and select the appropriate type of fitting. Don't choose the wrong one.
2. Eliminate burrs, sharp corners and debris at the end of the pipe, the purpose is.. there is no foreign matter under the sealing rubber ring and on the steel pipe.
3. Mark the ends of both pipes so that the pipe connector is in the center. After piercing the product into one end of the pipe, align the ends of the two pipes and move the connector to the center of the two pipes.
4. Adjust the Pipe repair coupling, and then use the hex wrench to evenly tighten the bolts above and above. After tightening the bolts, tap the insides of both sides of the pipe connector with a mallet to even out the gap with the pipe, then tighten the bolts for a seal.
The above is the handling method of Pipe repair coupling in bad condition. When bad condition occurs, it is necessary to check the pipeline and Pipe repair coupling, and then repair and maintain it according to the steps. Welcome to inquire if you need Pipe repair coupling!