Stainless steel straub open flex clamp manufacturers tell you that although the pipe connection is easy to install, it must be carefully operated according to the instructions, otherwise the pipe will leak, or even explode in severe cases. Let me tell you what problems will occur during the installation of the Stainless steel straub open flex clamp.

1. Do not draw a line on the pipe end first during installation.
Line drawing is an important step in the installation of the Stainless steel straub open flex clamp, it can help us avoid the pipe tilting during the installation process, and at the same time can accurately lock the connection part, so that the inner rubber ring can completely cover both ends of the pipe.
2. There is a problem with the outer diameter of the pipe
3. Install without the torque on the installation instructions
The manufacturer of Stainless steel straub open flex clamp tells you that we must refer to the torque on the manual for installation when twisting the bolts. If the torque is not enough, the pipe connection will not be tight enough. If the torque is too large, the bolts will be tripped. There are two ways It will cause problems with the pipe connection.