The manufacturer of the high pressure pipe repair clamp tells you to first confirm the outer diameter of the pipe and select the corresponding type of connector. Do not choose the wrong one.

The second step is to remove burrs, sharp corners and sundries at the end of the pipe. The purpose is to ensure that there is no foreign matter under the sealing rubber ring and on the steel pipe.
The third step is to mark the ends of the two tubes so that the connector is in the middle. The manufacturer of the high pressure pipe repair clamp tells you to insert the product into one end of the pipe, align the two pipe ends, and then move the connector to the middle of the two pipes.
The fourth step is to adjust the connector, and then use the Allen wrench to evenly tighten the bolts above DN150. The manufacturer of the high pressure pipe repair clamp tells you that after the bolts are tightened, use a mallet to hit the inner and outer sides of the connector to make it The gap with the pipe can be uniform, and then the bolts are tightened again to achieve a good sealing effect.
Easy maintenance: the high pressure pipe repair clamp manufacturer tells you that when repairing the pipeline, even if there is oil and water in the pipe, because there is no need for welding or heating, there is no fire and no danger of explosion, and the double-clamp, open, and foldable types are used. The repairer can be used for emergency repairs by dressing from the outside of various damaged pipelines.
It can be connected to pipes of different materials. The high pressure pipe repair clamp is made of stainless steel shell and has a longer service life. It is used in water, gas, petroleum, chemical, thermal, shipbuilding and other industries.