1. The pipe repair clamp manufacturer tells you that before assembling on the welding board, in order to determine the direction of the chuck, it is recommended to mark the chuck at a fixed position. The pipe repair clamp manufacturer tells you to then weld, insert the lower part of the chuck valve body, and fix the pipe in it. Place the pipe clamp and the other half of the cover plate and nail them tightly. Do not directly weld the chuck bottom plate.

2. The pipe repair clamp manufacturer tells you that when installing the rail on the ground, the rail can be welded to the base or fixed with screws. Then push the rail nut into the rail and rotate it 90 degrees. The manufacturer of pipe repair clamp tells you that the lower half of the pipe clamp is embedded in the nut, and the fixed pipe clamp and cover plate need to be installed on the upper half of the pipe clamp and fixed with screws.
3. Laminated components. The pipe repair clamp manufacturer tells you that the guide rail can be welded to the base or fixed with screws. First install the upper and lower halves of the pipe clamp, and then install the upper part of the pipe clamp on the pipe that needs to be fixed, and fix it with screws to prevent it from rotating with the anti-loosening cover. The pipe repair clamp manufacturer tells you to install the two pipe clamps as described above.
4. The pipe repair clamp manufacturer tells you that when assembling the curved pipe, the pipe should be directly fixed before and after the curved pipe with a pipe clamp. Some people suggest that such a support point should be a fixed location.