Before assembling the pipe clamp straub on the welding plate, in order to determine the direction of the clamp, it is recommended to mark the fixing place first, then weld the welding, insert the lower part of the pipe clamp straub body, and put the pipe to be fixed. Put on the other half of the pipe clamp straub body and cover, and tighten them with screws. Never directly weld the bottom plate with pipe clamp straub installed.

On the ground rail, the rail can be welded to the foundation or fixed with screws. Then push the rail nut into the rail and turn it 90 degrees, insert the lower half of the pipe clamp straub body into the nut, and put the pipe to be fixed, and then Put on the upper half of the pipe clamp straub body and cover, and fix it with screws.
Stacked assembly, the guide rail can be welded on the foundation, or fixed with screws, first install the upper and lower half of the pipe clamp straub body, put the pipe to be fixed, and then put the upper half of the pipe clamp straub body, fix it with screws, and prevent loosening The cover prevents it from turning. Then install the second pipe clamp straub, the method is the same as above.
Assemble the elbow, when assembling the elbow, it should be fixed directly at the front and back of the elbow with pipe clamp straub. It is recommended that such a support point should be a fixed position.